Posted by MohnJadden, I posted in the electronics thread but didn't really get much response. I got a Phantom FC40 with a Tarot gimbal for a Gopro Hero 3 off a guy on Craigslist. The gimbal worked fine when he demonstrated it and then the other day when i flew it. I don't know what happened but now when I power the gimbal on, the LED lights solid red, blinks green two or three times, and then stays solid red. British Standard Bs 1363 Firefox. Nothing happens with the gimbal.

Hi All, I have been trying to make adjustments to the Tarot gimbal in the ZYX software, so that I can control the angle of tilt and sensitivity. Tarot T-2D Gimbal. The two-axis Tarot Brushless Gimbal uses cutting. Sensitivity parameter adjustment and software 3D pose show. Tarot gimbal does not.

I tried unplugging and re-plugging the cable going from the square box on the camera bracket, and nothing happened. I powered everything off, unplugged and replaced, and tried again - nothing. Program Europe Final Countdown 1986 Rarities. I powered off, unplugged all cables, replugged them, and powered back on.

Many customers often have an issue when it comes to configuring their T-2D brushless gimbal if they are using a windows 8 or 8.1 PC. The main issue for this is be. Many customers often have an issue when it comes to configuring their T-2D brushless gimbal if they are using a windows 8 or 8.1 PC. The main issue for this is be.

I did some digging and found this link with a manual and some troubleshooting info: I can open the COM port, but it keeps the status at 'COM port open successfully, please connect ZYX-BMGC'. The USB interface cable is connected to the gimbal controller connector on the board. Find Subtitles 1.3. It's bent upwards a little, but it looks intact as far as I can tell. When I connect the battery power to the Phantom, the LED for the gimbal comes on, does the blink code, and stays red.